Category: Air Conditioning Servicing

Submitted by: Fiona Baron

Just what would summer be like without central air? In most parts of the country, central air is not a luxury, it s a necessity. Your central air conditioning system is your lifeline during hot weather, and when it goes on the fritz, no one is happy. Most central air units are connected directly to your home s forced-air distribution system. The same blower, motor, and ducts that are used to distribute heat are also used to distribute your cool air. Hot air from inside your home flows through your furnace via a return-air duct, and is then moved by the blower across the evaporator coil in your unit and then delivered throughout your vents in order to cool the home. If the air conditioning unit is working but the house isn t cool, then you likely have a problem in your distribution system. Your evaporator and condenser to your central air conditioning unit are sealed, which is one of the reasons that a qualified technician must be called out for any maintenance other than the routine cleaning that you can perform to keep your unit running in top shape. There are few repairs that the average homeowner can make on their own when it comes to central air, but there is specific maintenance tasks that you can undertake to make certain that your system does its job like it should.

Replacing Air Filter

The filter of your central air unit should be changed at least once a month, and more often during peak periods of use in order to allow air to properly circulate through the blower. A dirty filter can cause a host of problems for your central air unit. To replace the air filter, locate the filter in your unit. Some may be located on the condenser, while others may be found around the evaporator. Remove any grilles or housing that must be removed in order to access the filter and remove it. Replace the filter with the exact same type of filter. You can find the part number for the filter on the old filter, or simply take the old filter with you to the store when replacing it. Reinstall your central air unit filter, and make certain that the area around the filter is clean and free of debris and dust.

Cleaning the Condenser Coils

The condenser coils on your air conditioning unit should be cleaned at least once each year, preferably at the beginning of the cooling season, but they can be cleaned more often if they are dirty. To begin, shut of the power to the central air unit and turn the thermostat up. Remove the exterior metal grille if necessary, which is usually held on with bolts or screws. Use plastic bags to cover the compressor, motor, and other electrical parts, and then seal them with tape. Gently brush off any visible dirt from the condenser coils, and then use a garden hose to wash the coils from the inside. Allow the unit to dry before taking the plastic bags off of the compressor, motor, and other electrical parts.

Cleaning the Evaporator Drain

The evaporator coils on most central air conditioning units are sealed and can only be accessed by a licensed technician. But you can keep the evaporator drain clean. This is the drain that carries away moisture from the evaporator coils. If you see that there are puddles of water beneath the coils, then the drainpipe is likely clogged with bacteria and algae. Simply disconnect this drainpipe and flush the trap with a hose. Then pour in a tablespoon of bleach and reattach.

About the Author: Fiona Baron is a writer who loves home improvement. If you’re looking to get a new

Sacramento air conditioning system installed

give

Newmans Heating and Cooling

a call at 916-344-6625.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=595386&ca=Home+Management

Submitted by: Alex G. Bolden

Landscaping can be in the form of gardening and planting and can even stretch into the creation of artificial stone structures to beautify a particular area. Modern methods include improvising outdoor living spaces in the hope of creating something that will add to the beauty of a particular place.

Landscaping is the process of beautifying an outdoor area. Landscaping can be in the form of gardening and planting and can even stretch into the creation of artificial stone structures to beautify a particular area. Modern methods include improvising outdoor living spaces in the hope of creating something that will add to the beauty of a particular place. These outdoor living or recreational spaces include parks, gardens, promenades, back yard, indoor fire places or pits and even public sport and activity clubs. It is with the help of limestone, slate, granite, and concrete tiles that these areas are worked upon.

The process of landscaping outdoor living spaces is tedious and therefore requires the proper execution of a plan. The plan will include the method in which the landscape is to be created. Pointers for this have to be taken from clients interested in landscaping a particular place. The needs of the clients along with the craftsmen ship and the design aesthetic of the team of landscapers will lead to the creation of a beautiful structure that will lead to the beauty of the place that has been in construction.

Improvisations with stone have led to the creation of benches and innovatively designed waterfalls and fountains in gardens residential homes and even commercial complexes. A small section of natural beauty in the form of a fountain or a beautifully designed garden in a commercial space can change the whole look of the place. Due to this landscape, designing has become a priority with those who consider designing and architectural brilliance as being a part of every structure that is created. Landscaping for outdoor living spaces is offered by professional landscapers who take into account the area that have to work in order to create a marvellous structure.

The structures that are created might also come to include the creation of ponds along with other artificial water bodies like waterfalls and fountains. All of these structures are created using stones and hence it plays a crucial role in the process of stone selection. Landscapers based on the web have a number of stones that they offer. The choice of stones depends on the feel of the place and the kind of structure that is going to be created using them. The decision of choosing stone can be left in the hands of the client or the customer or the landscaper undertaking the construction job.

Along with undertaking outdoor living spaces construction, the sites offering these services also offer indoor services like setting up of kitchen table tops. The collection of stones that you will come across online are varied and hence it is best to have a good idea of what you are looking for before you go in and hire the services of these landscapers. Fieldstone is generally used for creating fire pits. A landscaper will evaluate the piece of land they are offered and will come with designs that could be used to create a beautiful structure.

About the Author: Alex Bolden is the author of this article on Granite Counter Tops. Find more information, about Teton Stone here Visit

tetonstonememphis.com/index.php/Core/Products.html

for more information.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1826631&ca=Home+Management

By Clair O’Hara

Air tools are frequently used tools. They are used by professionals such as interior remodelers, independent construction workers and contractors; as well as home owners and novices. It goes without saying that where air tools are used, air compressors are required. In the same breath, portability is a crucial factor for all tool users who do not want to be weighed down by a bulky compressor that takes up a lot of space.

Though portable compressors are synonymous with tire inflators, they can also be used to operate other power tools. In changing a flat tire, portable compressors have shortened the process by removing the requirement for a car jack and spare tire. They are used to inflate the flat tire quickly, so that the driver can get back on the road.

Air compressors are used with a plethora of other pneumatic tools. A common tool, especially for home use, is the inflation kit. They can be used to inflate everything from footballs to bicycle tires. Other useful tools are enumerated below.

1. Nail Gun

This is another common use for a portable compressor. They are used for punching nails on surfaces. An essential tip is to ensure that the nail gun is held flat against the surface being nailed and that the other side is clear.

2. Air spray

This makes painting a breeze by speeding up the application process and giving the surface a smooth finish.

3. Blow-gun

The attachment is vital for blasting unreachable dust, grease and dirt. It is used mostly for cleaning electronic items like PCs, television sets, and others. When operating this gadget, measures should be taken to keep the Blow-gun blowing away from body parts, especially the eyes.

4. Air stapler

They are stronger and more reliable than manual staplers and are used for heavy stapling jobs. The machine in use must always be held flat to the surface that is being stapled. There are larger staplers; some available for attaching roofing shingles.

5. Sandblaster

The sandblaster is used to prepare surfaces for painting by using pressurized air to remove rust, dirt and dust. The machine is also effective in cleaning equipment and degreasing engines when it is used with soap and water.

6. Air sander

Traditionally, the dual-action air sanders are used to remove rust and prepare a surface for painting. Nevertheless, they can also be used in the home. Note that the tool needs to touch the surface it is sanding when it is turned on.

Other tools include; the air ratchet, air hammer/chisel, air drill and impact wrench. These tools are mainly used for industrial and heavy-duty work in motor vehicle and assembly, building and construction and masonry.

Most of these tools are found at local hardware stores, with the specialty air tools available for renting. Note that it is important to read and understand the specific instructions that come with the tool. Instruction manuals come bundled in the package or can be found online. Although, portable compressors are becoming indispensable fixtures in our everyday lives, we must remember to exercise caution while enjoying the use of these tools.

About the Author: Clair O’Hara is writing on behalf of Excel Compressors, specialists in

Air Compressors

.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1427939&ca=Advice

Submitted by: Joshua Miller

There are a number of reasons why you should go for central air conditioning. If you are intending to find a way of conditioning the air in a large establishment, like say a building or a big house, central air conditioning is one of the best, if not the only, options you have. The AC system in this case utilizes a split system for condensation and compression. Its evaporator is connected to an air handing mechanism (forced air furnace). The entire machine is packed together as a large unit and put outside the establishment, usually on the roof or an outhouse.

The cool air circulated by the unit is transmitted through the length and the breadth of building. In case you want to alter the temperature you might use the controls provided to each dweller of the establishment. But such controls are not common and many systems come without these making it imperative for all the tenants of the specific house to bear with the general temperature set for the house.

Since the AC system is placed outside the building therefore it does not bother people living in the building with the disturbing humming sound most AC s make. A superior cleansing system also purifies the air it circulates so that the air you breathe is freed of any irritating allergen, dust particle or other unwanted substance.

Centralizing your AC unit also helps the administrators, engineers or maintenance people of the building to keep a strict check on the electric consumption and voltage requirements of the people in the building, since it leaves no reason for the tenants to run their personal AC units.

Centralized AC also gives you the opportunity to find out and decide the temperature you want, this in turn helps you control your electric bills, since, the more consistent the temperature is the greater control you have over your energy expenses.

An AC s filtering capacity is a feature you need to pay good attention to while purchasing. Your AC needs to make sure the air you breathe is clean, along with making it cool. In case it fails to do so it will be transmitting pollutants everywhere in the building.

For greater convenience you should probably try and install some means of controlling the temperature of the AC unit from each of your tenants apartments. Consult an architect as to how you might do this.

About the Author: Joshua Miller is an air conditioning repair technician. See more of his articles at

Residential Air Conditioning

and

Air Conditioner Covers

Source:

isnare.com

Permanent Link:

isnare.com/?aid=68528&ca=Home+Management

New media, new profit model builders turn on both sides-Jin Danuo LED display

by

carollgushee

12v led strip light Jin Danuo on both sides double LED display, it is in LED display of Foundation Shang increased has three surface double transform picture of function, both combination, disadvantages, makes its both three surface double of scale momentum, and has LED full color display of raging storm; rage tempestuously gorgeous, day for three surface double using, let which two a surface alternating flip, each motor 90 watts of power, both avoid traditional plane advertising of dull and plane of and savings has energy, solution has general electronic display day electricity volume large, Display problem of insufficient under direct sunlight. Go out in the evening and the third, becoming a full-color LED display, making the effect, more diversified forms, without air conditioning and artificial unattended, minimum 55 watts of electricity consumption per square meter, is the traditional LED display one-sixth.

G4 led bulb On both sides double LED display, day is fixed of II a plane advertising, night is full color LED display, both can Omni-directional meet Telecom, and real estate, large customer clock cover requirements, and can good to service Yu video advertising customer, day of II a fixed customer, magnificent, advertising benefit good, customer willing to long-term put, night of LED video effect, not only can play video customer, also can secondary day of customer do promotion, such as play company image tablets,, to reached more angle brand publicity, Realization of advertising effectiveness value, flexible operation mode, zero-risk, zero investment burden in the late, customers can to develop more flexible advertising model, while demand in their own profit, to better protect the interests of advertisers. led rgb controller And traditional LED display compared to, Jin Danuo on both sides double LED display investment operations more flexible, traditional LED display only play video advertising, on requirements full days Hou cover of large customer,, on only always bemoans has, large customer of loss on LED large screen operators,, not micro-vascular bleeding, but active pulse rupture, long this down, traditional LED large screen under itself investment difficult, and operations cost large, and advertising cover, limitations, will difficult to can negative global, Then unable to realize win-win situation for advertisers and customers. So-called “troops is not dynamic, stores first”, traditional LED large screen in investment zhiqian on must light screen operations, and operations of cost and extremely high, investment smooth is good, once blocked will will directly threat to operators of survival, and Jin Danuo on both sides double LED display is on limited of space for maximum degree of development and using, makes same location implementation profit times even a dozen times times of value-added. Same location, both Tri-fixed income, and LED display multiple customers, optimized portfolio will give customers more flexible business model, completely solve the customer later operations investment problems. LED display for both sides to Jin Danuo case, compared to the traditional LED display and 200 square meters, Jin Danuo LED display on both sides of annual electricity savings of more than $ 300,000! Minimizes operational costs, and tri-use during the day, LED display actual work time up to 7 hours a day, saving energy much more than these. Its unique mode of work, effectively avoid attenuation of LED display screen to work long hours to speed up electronic components age, greatly extending the life of the screen. If existing national traditional LED displays LED display on both sides be replaced by Jin Danuo, when power 4 million-kilowatt a year, equivalent to the consumption of a small town for a year, while reducing carbon dioxide emissions by about 50,000 tons, not only of the Government of low-carbon and energy-saving requirements, evasion more effectively, electricity, power cuts and shortages of electricity, etc. Jin Danuo invention patent “bomb axis 360 drive system”, Duo color image processing chip, 28 items national patent, on both sides double LED display by virtue of low, and efficient, many advantage for user save large of expenditure, makes user in investment pricing Shang more flexible; without air conditioning and hand unattended, save has operations cost, to guarantee profit space maximize; unit module of of design easy maintenance, without regularly cleaning. Jin Danuo LED display on both sides also have superior wind resistance structure, strong winds from the triangular prism gap and patented designs of Venetian-style back through, minimizing air resistance, ensuring high security. New forms of expression, very low operating costs, quality of rock solid, allowing users more flexible investment strategies, while demand in their own profit, to better protect the interests of advertisers, good cooperation to achieve win-win situation. 12v led strip lightG4 led bulbled rgb controller

Article Source:

New media, new profit model builders turn on both sides-Jin Danuo LED display